I cannot confirm that the Replacement Plastic Ladder Rung End Cap on Stromberg Carlson RV Exterior Ladder - Qty 1, # 8540-CP will fit your Kemberly Inc. RV ladder. However, the rough measurements are 2 inches in length by 5/8 inch wide and 1 inch deep. With this being a contoured piece, the measurements are close and hopefully enough for you to determine if it will fit or not. view full answer...
The Surco Universal Exterior RV Ladder # SP501L has a the weight capacity of 250 pounds, so it will work well for you. This ladder has center hinges to allow the ladder to bend to accommodate the contour of the back of your RV.
We do not carry a replacement for the bottom half of a ladder. view full answer...
The height listed for the RV ladders we offer doesn't include the height of the return, or the 'hook' portion at the top of the ladder. In the case of the # SP502L RV Ladder, the overall height is 84-1/2-inches and from mounting surface to mounting surface the dimension is 76-1/2-inches. When the 8 inch height of the return is added, the full height of the ladder is 92-1/2 inches.
So, if you'd measure down from the RV roof by 84-1/2 inches, you know where bottom of the ladder would sit. view full answer...
The tallest available exterior ladder we offer is the Stromberg Carlson RV Exterior Ladder part # LA-401 for silver or part # LA-401BA for black which measures 99-1/2" tall. That said, you can add an extension piece as well to get the ladder where you need it, the Stromberg Carlson RV Ladder Extension part # LA-148. view full answer...
The height of our RV ladders are calculated by measuring from top to bottom. We offer exterior ladders ranging from 84-1/2" to 99-1/2" tall. However, most of them such as the Stromberg Carlson RV Exterior Ladder part # LA-401 are customizable meaning they can be trimmed to the exact height you need.
The above ladder should work well for you. It is constructed of a lightweight aluminium and comes with all the mounting hardware and brackets you will need for installation. The best feature... view full answer...
The Replacement Plastic Endcap for Ladder Rung on Stromberg Carlson RV Ladder # 8539-CP does not appear to be the same as the one in your picture. Your picture shows a screw where the logo is located on the # 8539-CP. I cannot confirm if this would fit for you or not. I can provide you the dimensions of this cap and another that we carry and you can see if it will fit.
- Replacement Plastic Endcap for Ladder Rung on Stromberg Carlson RV Ladder # 8539-CP (2" long x 1/2" wide x 1/4" deep)
-... view full answer...
On the product Replacement Rung for Stromberg Carlson RV Exterior Ladder # 8540-NT, ladder tube holes fit 1 inch round tubing. Distance of the step portion of the treads of the # 8540-NT between the ladder tubing is 10.5 inches. See attached pictures for complete dimensions. view full answer...
The overall length of Surco Universal Exterior RV Ladder # SP502L is 84-1/2-inches. This is the ladder measured end to end. The amount of curve on the top portion that bends to connect to the RV's roof is 8-inches, as shown in the linked photo. Other dimensions are provided as well. This USA-made replacement ladder includes mounting hardware. view full answer...
From the point that attaches to the top of an RV to the other side of the ladder the # LA-401 measures 18 inches. This ladder uses 5 inch stand-offs, so from the edge of the top of your RV to where the ladder will attach will be approximately 13 inches.
There is a hinge for the bottom section of the ladder as well. It's not really designed to fold up once mounted. It's more for allowing the ladder to mount to a surface that's may not be totally flat. view full answer...
Surco universal RV ladder # SP502L is rated for 250 pounds like its cousin # SP501L. The similar Stromberg-Carlson ladder, # LA-401, is rated for 250 pounds. I have linked a video of the Stromberg-Carlson RV ladder for you. view full answer...
The widest RV bunk ladder we have available is the Stromberg Carlson RV Bunk Ladder # LA-460B which is 13" wide and is 60" tall- but the lower legs can be trimmed down to fit your 56" space. view full answer...
I have attached a photo that has the dimensions noted for the Surco RV Bunk Ladder, part # SP503B. As noted, this ladder is 12 inches wide and 60 inches long. view full answer...
The diameter of the Replacement Stand-Off Brace for Surco Universal Exterior RV Ladders SP501L and SP502L # SPN-416 is 1 inch. I do have to say that there can be some ever-so-slight variances with all products when it comes to dimensions, but it will be as close to 1 inch as can be.
The Replacement Stand-Off Brace # SPN-416 is a replacement for the Surco Universal Exterior RV Ladder - 84-1/2" Long # SP502L and Surco Universal Exterior RV Ladder with Center Hinges for Contoured Rear Wall... view full answer...
In regards to the Stromberg Carlson Exterior RV Ladder part # LA-401, the distance from the trailer to the ladder will be about 4-7/8" as that is the length of standoff shown below. view full answer...
The Camco Chair Rack for RV Ladders part # CAM51490 has a 60 lb weight capacity therefore so long as your Little Giant Ladder does not exceed this figure you will be good to go. I can't say we have any racks for a ladder that are designed to attach to another ladder so this might just be your best option. In order to secure the ladder I would just use some bungee cords like part # EM07037. view full answer...
The Surco RV Bunk Ladder # SP503B has rungs that measure 12-3/4 inches long with 10 inches in between the tubes and 2 inches wide but with the plastic covers 2-1/4 inches. There is 12 inches between the rungs. view full answer...
The shipping weight of the Stromberg-Carlson RV bunk ladder, # LA-466B, is 6.88 pounds so the ladder itself weighs approximately 5 pounds. The weight capacity is 300 pounds. I have included a link to a video review of this bunk ladder for you. view full answer...
The tube of the Stromberg Carlson RV Exterior Ladder # LA-401BA (Black) as well as # LA-401 (Silver) is exactly one inch.
I have added a link to a video review of this ladder for you to check out. view full answer...
We do have a black version of the Stromberg Carlson RV ladder part # LA-401 with the part # LA-401BA. For the overhang dimension the distance from the center of the mount tube of the # LA-401BA to the furthest point opposite measures 18 inches. view full answer...
Go To Results